Balustrade Glass Thickness

This should be carefully assessed too thick and it wont be able to slot into the fittings too thin and you will compromise both its.

Balustrade glass thickness. A minimum thickness of 6mm is permitted for infill panels 8mm for structural panels Figure 2 and is not advised for structural cantilever panels Figure 1. A glass balustrade is the use of frameless glass as a protective barrier. The thickness and type of glass used will vary from system to system but generically the most common glass type used in framed balustrade systems and as infills within timber stairs is 10mm toughened.

Ad High quality low maintenance glass balconies made to order. The frameless system is easy to install and can be set up in just 2 days. Create Your Custom Frameless Glass System Use our calculator to.

It would not be prudent to use tempered glass that is less than 10mm thickness or laminated glass of less than 135mm thickness. Toughened Safety Glass Panels 15mm Thick 1100mm High Post Rail Toughened Safety Glass Panels 10mm Thick 900mm High Post Rail Toughened Safety Glass Panels 12mm Thick 900mm High Toughened Laminated Safety Glass Panels 175mm Thick 1100mm High. For the glass height you need to deduct the thickness of the base U-channel see typical deductions below.

90 Degree Corner LED Balustrade. Glass Thickness in Balustrades. Glass in Juliet Balconies.

A minimum thickness of 15mm toughened glass panel must be employed for structural systems with a handrail even for residential single family dwellings properties. The type of glass used for internal glass balustrades is the tempered or toughened and laminated glass with a minimum thickness of 215 mm or 2732 inches. An infill panel of glass with thickness selected in.

Contact the friendly expert team at Balustrade Components on 01543 624780 or use the Contact Us form. Need to discuss these regulations further. A glass balustrade must comply with AS1288 Australian Standard AS1288-2006 AS1288 sets out the procedures for the selection and installation of glass in buildings subject to wind loading human impact and special applications such as overhead glazing balustrades and glass assemblies.